4 Clever Ways to Distribute Engine Power

A few weeks ago, I posted about limited slip diffs (LSD's) and how they generally make cars quicker on track by helping you make better use of available traction. But as you might know or have learned from reading the article, they aren't without their faults, which means engineers are always working to get around those limitations.

You may not be surprised to learn that something like the Ferrari 488 GTB doesn't use a traditional limited slip diff, but it's not limited to super cars, far from it. Cars like the Golf GTI, the Civic Type R, various Mustangs, Corvettes, and BMW M cars, and even the Lexus RC F and GS F, all avoid a traditional limited slip diff in favour of one of these technologies. To keep things simple, I'll focus on two wheel drive vehicles. The vast (vast) majority of principles apply to all and 4 wheel drive vehicles, but there are some subtle differences that I'll cover in a future post.

Gear-type Limited Slip Diffs

Exploded view of Torsen T2-type differential - JTEKT ©

Exploded view of Torsen T2-type differential - JTEKT ©

The name is a bit misleading because the vast majority of differentials use gears (yes, some differentials don't. More on in a future post on AWD/4WD diffs). But gear-type limited slip diffs refer to a differential that uses a mechanism of gears to provide lock-up instead of clutches or viscous fluids as discussed in the previous article. If you've ever heard of Torsen or Quaife diffs, that's what they do. They are probably the two most popular manufacturers of these types of differentials, but there are others.

I won't get too much into how they internally work (stay tuned for a future post on that!) but what I'll focus on instead is how they affect the car differently compared to traditional LSD's. The main difference is how they lock. Instead of using a set of clutch packs for instance to lock or partially partially lock the differential, they use binding. Most of those differentials utilize helical gears which - inherent to their design - transfer part of the torque as a thrust force that pushes the gears outwards. By doing so, the gears progressively bind with the diff case and each other, in effect locking the differential.

Since the force generated is proportional to the force (torque) being transferred by the gears, lock up is proportional to input power (i.e. how much power you're applying). That's why they are called Torsen (Tor for Torque and Sen for sensing) because they "sense" torque and lock up in response. If you're off the power, it's basically an open differential because there are no forces to bind the gears and lock the diff. As you roll into the power, it progressively and smoothly locks up.

Quaife ATB (Automatic Torque Biasing) front LSD - Quaife ©

Quaife ATB (Automatic Torque Biasing) front LSD - Quaife ©

The benefit to that is, because the diff is more open off power, you can typically get away with higher torque bias ratios than non gear LSD's without seeing as much of the side effects of higher locking (resistance to turning and understeer as discussed in the previous post). The higher TBR allows better traction performance as discussed in the last post.

Moreover, the fact that lock up is proportional to input power means the diff locks up as you send more power, without the need for slip. Non-gear LSD's need slip to work as intended. If you are going around a turn with no inside wheel slip, a traditional LSD diff is waiting for slip. The same is true for driving in low traction conditions like snow or ice.

Only after one wheel begins to slip does a traditional LSD begin to do something you want. This is also the cause of the potential for "fish-tailing" discussed with traditional LSD's (and absent modern stability control systems) because it responds to slip and can shuffle power back and forth between two sides.

Mustang Shelby GT350R at Atlantic Motorsport Park - Graham MacNeil ©

Mustang Shelby GT350R at Atlantic Motorsport Park - Graham MacNeil ©

With a gear type differential, both wheels are limited before they slip. The more power you apply, the more the diff (progressively) locks, preventing excessive slip from happening in the first place because both wheels are locked to a degree. And because they are more forgiving of a higher TBR, cars can better put power down, accelerate faster out of turns, and generally perform better on track. Examples of cars that use this type of diff include the Civic Type R, Toyota 86/Subaru BRZ, various Mustangs (Boss 302, Perf. Pack, Shelby GT350/GT350R, and the upcoming Shelby GT500), Focus RS (front differential, final edition), and some Audi Quattro models.

Brake-based Differential Lock

A car that uses brake-based limit slip action utilizes an open differential just like described in the first diff post Why an Open Diff Doesn't Work on Track. But the car attempts to solve the shortcomings by applying the brakes to individual wheels. If you roll into the power and one wheel spins, the car's computer realizes that and applies the brakes at the spinning wheel.

In high performance driving, this solves the two shortcomings of an open differential: loss of grip due to a spinning wheel and under utilizing good grip at the loaded, outside tire. As we've established, an open diff transfers equal torque to both wheels. When you're coming out of a corner, there is plenty of weight transfer, meaning the outside wheel is loaded and has higher grip. It can transfer more power. In order to distribute torque where you want it (unevenly; more torque going to the outside loaded wheel), the brakes are engaged at the inside wheel. That slows down the wheel that doesn't have as much grip which would be spinning excessively because the power you are sending exceeds the available grip.

3rd gen Ford Focus ST at ASCC autocross - Kevin Doubleday ©

3rd gen Ford Focus ST at ASCC autocross - Kevin Doubleday ©

In other words, the car is artificially creating resistance at the low traction wheel. The diff is still transferring equal torque to both wheels, but the brakes increase the torque holding capacity of the inside wheel, and the diff as a whole as a result, thereby allowing the diff to transfer more torque overall. Half of that torque goes to the outside wheel where it can all be used. The downside is wasting some power simply turning the low traction wheel against the brakes. The second problem is, as a result of trying to power the low traction wheel against the brakes, the brakes can overheat and prematurely wear.

You'll hear a lot of owners and reviewers complain about their effectiveness, or lack thereof. The problem is the application, not the tech. In a Focus ST or a Golf GTI (non PP), you don't have liberally sized brakes, brake cooling ducts, brake system (thermal) capacity, etc. In reality, an optimized brake based setup can work very well. McLaren uses them, for example. You won't hear too many people complain about their performance.

McLaren 720S - Graham MacNeil ©

McLaren 720S - Graham MacNeil ©

In a future post, I'll explain in more detail why they don't work very well most of the time. But even for humble cars, the benefit is that the tech is extremely flexible because it provides complete uncoupling and independence between the two wheels when no lock up is needed and infinitely variable and adjustable bias ratio when you do. You have non of the shortcomings of mechanical LSD's and all the benefits of limiting slip and sending power where it can be used. If you can get around the heat and overuse of brakes, then it's a very capable technology. Examples of cars using this technology are the Focus or Fiesta ST, Golf GTI (non PP), Subaru WRX's, Jeep's, and, well, McLaren's...

Electronic LSD's (eLSD's)

eLSD is often used to refer to electronic limited slip differentials. They attempt to combine the benefits of all the above without any of the downsides (what a concept!). It is essentially a clutch-type limited slip differential as the one discussed in the previous post. Only here, the clutch packs are controlled and engaged electronically. You only get lockup when you want. This solves most of the shortcomings.

Eaton UltraPosi Electronic Limited Slip Differential - Eaton ©

Eaton UltraPosi Electronic Limited Slip Differential - Eaton ©

It doesn't have the same resistance to speed differentiation unless activated so it can have a higher lock-up with no downside (understeer). It is electronically controlled so it can selectively lock and unlock as needed based on real time calculations and inputs from various sensors. It doesn't have to worry about brakes overheating. It doesn't get confused by road conditions like a traditional LSD.

It could also preemptively lock prior to slip happening to prevent slip based on the car anticipating the need for lock, such as rolling into the power in low traction conditions or exiting a corner. It can give you high diff lock when you need, say, exiting a slow narrow turn, and low or no lock in corner entry, reducing the understeer you'd get with a high lock/bias ratio.

2016 BMW M4 at Atlantic Motorsport Park - Graham MacNeil ©

2016 BMW M4 at Atlantic Motorsport Park - Graham MacNeil ©

In summary, it gives you higher traction performance while eliminating most of the downsides of higher traction performance since it selectively locks only as needed. Its only downside, really, is complexity due to the electronic controls and actuators, resulting in having more parts to go wrong. Examples of cars using this technology are the Mk7 Golf GTI, Camaro SS 1LE, Corvette Z06/ZR1, Porsche GT3 and GT2 RS, Ferrari 488 GTB, and BMW M cars.

Torque Vectoring Differential

A torque vectoring differential is very similar to an eLSD. The main difference is that eLSD's only transfer torque from slower to faster. An eLSD is a basically a typical LSD, say a clutch-type, where the clutches, and therefore amount of lockup, are electronically controlled instead of passively activated based on the difference in speed between the two wheels on an axle. That means that they can control when and how much to lock up, but after that, the same principles apply and torque is biased from the faster spinning wheel to the slower wheel. However, a torque vectoring diff can transfer torque in either direction and can do so independently of a speed differential.

Lexus Torque Vectoring Differential (TVD) - Lexus ©

Lexus Torque Vectoring Differential (TVD) - Lexus ©

The benefit is better control (from the car) and wider range of adjustability, allowing the car to correct and/or improve more frequently and in more situations. Moreover, a torque vectoring differential doesn't transfer torque by locking up. Instead, most utilize actuators (clutches and/or motors) and planetary gear sets to overdrive or under-drive each wheel independently. The best way to simplify them is to think of them as having two tiny gear boxes on each half-shaft/wheel. Changing gearing in each gear box changes how much torque is sent to each wheel, thereby independently controlling how much torque (and therefore power) each wheel gets.

What does this mean? It means you have no resistance to speed differentiation (i.e. understeer) but as much torque transfer to either wheel as you want (can be up to 100% of torque sent to the diff). The downside of lockup (understeer) is eliminated, a huge plus to start with. Then you get the best torque bias you could get (basically infinite if designed for 100% bias), allowing you to utilize every last bit of traction available, and to top it off, you can have individual wheel torque control to help the car handle.

Lexus RC F - Lexus ©

Lexus RC F - Lexus ©

For example, if the back end is starting to slide, you could vector torque to the inside to bring it in. This has the same effect as a stability control system applying individual braking to a wheel or more to bring the car back in shape but braking means scrubbing off speed. Torque vectoring doesn't. You could also transfer torque to the outside wheel to help the car rotate if the car is understeering.

It's a technically wonderful system. The range of adjustments is huge. Opportunities to improve the handling are plentiful. It can make a huge difference in how the car handles. The only downsides are added complexity, weight, and a less "mechanical" feel. Examples of cars using this type of diff are the Lexus RC F, Lexus GS F, late-model Mitsubishi Evo's (rear diff), and a number of Audi S and RS models (rear diffs).

Which one is best?

Well, brake-based systems are hugely flexible and simple, but because of the heat issue and power wasted, I'd only take one if I had to choose between one of those and an open diff. Otherwise, my preference is the gear type LSDs, even though they aren't as capable as electronically controlled ones.

My 2012 Mustang Boss 302 at Atlantic Motorsport Park - Graham MacNeil ©

My 2012 Mustang Boss 302 at Atlantic Motorsport Park - Graham MacNeil ©

Gear type LSD's provide the best performance without going to an electronically controlled system, in my opinion. Compared to electronically controlled LSDs, they're more natural feeling, simpler, and cheaper to maintain. They demand more of you, expect less of the car.

But the same can be said for better tires, better dampers, stiffer chassis, etc. that could help make up for skill level, so I can see people arguing both ways. I would imagine that someone learning on and sticking to torque vectoring technology on track would see it as natural and consider it a baseline; anything else is a compromise. That wasn't the case for me. I didn't drive cars with torque vectoring technology until a few years ago, so they will always seem like the deviation from norm - the cool tech that manipulates the car to your advantage, not the bare essentials.

With that said, in a FWD or FWD-based AWD car, I would absolutely and unquestionably give in and take torque vectoring or eLSD's. In a heart beat. The drivetrain layout is working very hard against you to prevent the car from doing what you want it to do. The tech does its best to mitigate the limitations. The way I see it: it almost undoes the crime that is FWD-based, transverse engine layout as opposed to improve the text book longitudinal front engine, RWD layout.

What about you? Which technology would you rather have in your car? Let me know in the comments below!

Liked this? Follow Rams Eye The Track Guy for more!

DriveTribe

Rams Eye The Track Guy | DriveTribe

A track rat posting racing/rallyx stories, reviews, tech features, & speed news.