Fancy Yourself As a Budding Mechanic? Try our Latest Quiz!
Whats the correct terminology of the 4 stroke cycle?
- Suck - Squeeze - Bang - Blow
- Induction - Squeeze - Bang - Blow
- Blow - Suck - Compression - Power
- Induction - Compression - Power - Exhaust
The Laws Of Ackerman's Principle State...
- Where The Camber And Caster Angles Intersect
- The Outside Wheel Turns Faster Than The Inside Wheel Whilst Cornering
- The Inside Wheel Turns Faster Than The Outside Wheel Whilst Cornering
- Both Wheels Turn At The Same Speed During Cornering
What Is This Commonly Suspension Set Up Known As?
- MacPherson Strut
- Leaf Spring
- Torsion Bar
- Air Lift Suspension
What Is The Benefits Of Using Slotted Brake Discs?
- Improved Stopping Distances
- Longer Durability
- Better Heat Dissipation
- Weight Reduction
What Is The Baulk Ring Commonly Made Out Of?
- Cast Iron
- Reinforced Steel
- Aluminium
- Phosphor Bronze
What Is The Benefit Of Having Crimped Sections On The Friction Plate?
- Smooth Engagement And Disengagement From The Flywheel
- To Reduce Vibrations When Engaging And Disengaging The Clutch
- To Reduce Torsional Stress On The Clutch System When Engaging And Disengaging With The Flywheel
- To Enable The Driver To Change Gears
Which Electronic Symbol Represents A Relay?
What Is The Purpose Of The EVAP System?
- To Reduce Engine Emissions By Cooling The Combustion Temperature In The Cylinders
- To Monitor Fuel Pressure To Ensure That It Doesn't Drop Low Enough For The Engine To Stall
- To Increase Engine Power By Releasing Exhaust Gases Into The Cylinders
- To Monitor All Four Tyre Pressures In case Of A Flat Tyre
Does The ECU Use An Open or Closed Loop Signal On Cold Start Up?
How Can You Measure A Parasitic Drain On An Effected Vehicle?
- Performing a Continuity Test On the Battery Terminals Whilst Unplugging And Replugging Fuses In a Systematic Order
- Using A Volt Meter On the Battery Terminals Whilst Unplugging And Replugging Fuses In a Systematic Order
- Change The Battery and Alternator On The Customers Vehicle
- Using An Amp Clamp On The Positive Side Of The Battery Whilst Unplugging And Replugging Fuses In a Systematic Order
Join In
Comments (51)
80%
I didn’t expect that sort of result.
60%
50%
50%
100%
Congratulations well done